ProLiant Servers (ML,DL,SL)
1745833 Members
4140 Online
108723 Solutions
New Discussion юеВ

PSP 7.8 Windows 2003 driver will not install

 
SOLVED
Go to solution
Steffen Pelzetter
Frequent Advisor

PSP 7.8 Windows 2003 driver will not install

Hello,

I have on some of our systems (proliant dl 380 & 320 G4) with windows 2003 problems install a new driver for some components, after upgrading to psp 7.8 using Version Control Agent.

The same is on windows 2000 server with psp 7.6A too.

On the psp 7.8A the following software can't be installed:

cp006929 - HP ProLiant CSB-6 ATA-100 IDE RAID Driver for Windows 2000/Windows Server 2003
-installed Version: 4.1.730.2003
-latest Version: 4.2.805.2005

Additional Data
---------------------------------------------------------------------------
Setup Session Beginning 11.06.2007 - 12:18:03
---------------------------------------------------------------------------

Command Line Parameters Given: /silent

Name: HP ProLiant CSB-6 ATA-100 IDE RAID Driver for Windows
2000/Windows Server 2003
New Version: 4.2.805.2005

Beginning Silent Session...

The software will not be installed on this system because the required
hardware is not present in the system or the software/firmware doesn't
apply to this system.

Installation will not continue.


cp007770 - HP ProLiant 64-Bit/133-MHz Single/Dual Channel Ultra320 SCSI HBA and SCxxXe series SCSI HBA Driver for Windows Server 2003 -
- installed version : 1.21.8
- latest Version : 1.24.4.0

Additional Data
---------------------------------------------------------------------------
Setup Session Beginning 11.06.2007 - 12:21:45
---------------------------------------------------------------------------

Command Line Parameters Given: /silent

Name: HP ProLiant 64-Bit/133-MHz Single/Dual Channel Ultra320
SCSI HBA and SCxxXe series SCSI HBA Driver for Windows Server 2003
New Version: 1.24.4.0

Beginning Silent Session...

The software is installed and up to date. The installation process does
not need to continue, however, you may still install the software.

- /force must be specified on the command-line to enable installation

Installation will not continue.

The new driver version is no longer compatible with the installed hardware? How can be?

The Version Control Agent remains in warning state on these machines.

Any suggestions for that problem?
3 REPLIES 3
Igor Karasik
Honored Contributor
Solution

Re: PSP 7.8 Windows 2003 driver will not install

Hi,
See Logapriyan answer on the end of this thread:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1127033
Steffen Pelzetter
Frequent Advisor

Re: PSP 7.8 Windows 2003 driver will not install

Thank you to point me to the solution. Solved my problem to 100%.
Steffen Pelzetter
Frequent Advisor

Re: PSP 7.8 Windows 2003 driver will not install

OK, thread closed!