ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

PXE disabled for XE NIC after PXE boot to HP toolkit 9.60 on HP SL210t

KidCargo
Occasional Contributor

PXE disabled for XE NIC after PXE boot to HP toolkit 9.60 on HP SL210t

After one PXE to HP toolkit v9.60 on XE 10GB NIC, SL210t will not PXE again until RBSU is reset using Intelligent Provisioning (BIOS reset does not effect the same result).  Older toolkit does not have this issue.  I cannot find anything in the documentation that touches on this PXE shutdown.  I did not see anything in the BIOS that would enable or disable this.  All NICs are enabled in BIOS during this non-PXE state.  Disabling/Reenabling the NICs do not solve the issue.  Any info is greatly appreciated.