Please Help to install Win2003SE on DL160 G6

[K.Tchernyh]

I try to install Windows 2003 SE on DL 160 G6.
I have 4 hard drives (250GB) RAID5, and P410 controller.

1. Via easy-setup CD i have error 0x000000D1 at a converting stage from FAT to NTFS at the setup process (BSOD). After server reset the setup of Win2003 proceeds successfully. After setup i have 1 disk ONLY 4GB vol. In the Device manager we see 2 problem devices: PCI device and Unknown device. For this devices i can't install any of drivers which are on site hp.com.
In the "computer control"->"disks contol" properties of a disk - about 658 GB, but in the "My computer" the system shows only 4 GB disk.

2. Via setup from Windows Server 2003 SE CD, i have error 0x000007B (BSOD) at a stage of loading of the installation program from CD.
After reboot this error appears again.

What I need to make successfully to install system?

[Pavel Bradut Boghita]

use HP SmartStart disk, try and reconfigure the raid (you should be able to do that with the smart start disk)

[Creek]

Do you have the latest Easy Set-up CD for this product? v2.00B is located at http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3884343&prodNameId=3884344&swEnvOID=1005&swLang=13&mode=2&taskId=135&swItem=MTX-3a465515352c4cf891f5bf1aca.

SmartStart will not run on the DL160 G6.