Please help me to detect

[pitos]

Hi.

I have Porliant DL180 G6 server.

Inside.

Motherboard's SATA connected to harddisk case banded cable.

Cable photo - 

Of this bunch out wire.

wire photo - 

What is this?

Maybe I plug it into the socket on motherboard?

socket photo - 

[Martince3134]

Hi,


the red marked connector is >Hard drive backplane SGPIO connector< and there should be connected cable from HDD backplane,


regards,


i'm HP employee

[mich_a]

Dear pitos,

The link below will help you isolate what is this connector:

http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01737517&sp4ts.oid=3884342#N10AB6

Regards

[SvMel687 · Accepted solution]

Hello,

please check the Maintenance and Service guide for Dl180 G6 from this link:

http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/action.process/public/psi/manualsDisplay/?sp4ts.oid=3884339&javax.portlet.action=true&spf_p.tpst=psiContentDisplay&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.prp_psiContentDisplay=wsrp-interactionState%3DdocId%253Demr_na-c01727924%257CdocLocale%253Den_US&javax.portlet.endCacheTok=com.vignette.cachetoken

- from the page  45 you have table "Cable connections"

- table 13 on page 46 contains all conection from the system board

- on system board you marked connector J66 - this is 10-pin Hard drive backplane SGPIO connector which is connected to the 2 HDD backplane on the HDD PCI cage
- check other tables where is described HDD conections based on Dl180 G6 HDD model (4BAYs, 8BAYs, 12bays etc)

[pitos]

Ok. I understand.

Thx 2 all. Close topic pls.