ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Please help me to remove the Access Panel of Hp Proliant ML150 G5

SOLVED
Go to solution
sang_5
Occasional Contributor

Please help me to remove the Access Panel of Hp Proliant ML150 G5

Hello,
I read the manual of proliant ml 150 g5, but i can not remove the Access Panel of it.

In the manual guide, it said " slide the Access Panel back about 1.3cm ", but when i slide back, it just back about 0.5cm and it can not slide back anymore.

Please help me , i am noob in IT.

Thank you.
3 REPLIES
Sam_Lees
Frequent Advisor
Solution

Re: Please help me to remove the Access Panel of Hp Proliant ML150 G5

Have you undone the Thumb screws on the rear of the server. Use a bit of force when sliding the access pannel, as you should not be able to break anything.

Refer to the Installation guide.

http://h50224.www5.hp.com/TechCenter_StaticArticle/42442/54328.pdf

marcus1234
Honored Contributor

Re: Please help me to remove the Access Panel of Hp Proliant ML150 G5

TarunJain
Respected Contributor

Re: Please help me to remove the Access Panel of Hp Proliant ML150 G5

Hi,
How about videos to guide you!!
You can access the service videos on HP CSR Services Media Library
http://h20464.www2.hp.com/default.htm

Help on using the CSR Services Media Library (SML):
http://h20464.www2.hp.com/help/smp_help_media_lib.htm?jumpid=reg_R1002_USEN

Hope that will help you gain confidence to service HP Products
Cheers
Tarun