Power Management Module for BL enclosure

[john_347]

Hi All.

We have a BL enclosure with 2 power enclosures with a mini bus bar, running firmware 2.10.
The enclosures are set to power zone 1 and are correctly cabled to the main management module.

Unlike the other enclosures the 2nd power enclosure does not have the power zone light displayed but does have the power light on.

We have reset the module and as a last resort have reseated the card after a power down, still no good.

Within ILO we only see 1 power enclosure not 2 as we would expect to see

Anyone have an idea

regards

john

[sputnix]

Hi John,
do you using the Dual Power Input Kit for Mini Bus Bar - required for support of two power enclosures (364565-B21)?

regards

andreas

[john_347]

Hi,

If you mean the little cable that links the 2 enclosures on the left hand side as you face the back, yep thats in place

many thanks for your responce... thought there was nobody out there


regards


john

[sputnix]

Do you have trying to replace the blue crossed-cable from the managemnet LAN with a new one?

Last idea!

greats andreas

[john_347]

Hi Andreas


As you suggested but still didnt work, Think I will put a call into HP

thanks for your efforts

john