Power Management on Compaq ProLiant Servers

[Grieder]

Is power management available for Compaq ProLiant Servers?
What ACPI system states are implemented (S1 to S5)?
Has anyone used this feature on a small business application?

[Prashant (I am Back)]

Hi

Check attachemnt till will clear the douts where as it is same in pcs alsi for hp

regards,
Prashant S.

[ernst limbrunner]

hi grieder

there is NO power management available for proliants.

all power things are checked and reported by hp agents to insight manager.

however, the hw will not slow down or enter any other power saving mode.

if you want to save $$ on power, you should not use a server.

all other power related problems do NOT exist in a proliant server.

you got very strong fans, really powerful power supplies, an excellent thermal layout and thermal shutdown in case something goes wrong with the hw.

this means, that all the hw is running all the time. this is good and absolute necessary for fast response times.

best regards
ernesto

[Grieder]

Dear Mr. Limbrunner
Thanks for your answer.
Yet I insist that power management is an issue even for servers. Check the following for example -> www.intel.com/update/contents/sv09031.htm or -> www.cs.duke.edu/ari/publications/bop-statement.pdf