ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Power Supply problem

Ayman Altounji
Valued Contributor

Power Supply problem

Hi!

We have four servers for RAS.
In the each two servers are one EICON ISDN card, in other two EICON ISDN cards.
We had to change power supply in three servers in five months.
Two servers - with one ISDN card - haven't problem at present.
The others: working at 3-4 day, then between ISDN card and RAS communication break down, need the system restart.

The two cards - can handling the analog calls! - consumption: ~8 Amper.

Maybe this the problem?
Please help me.

Csaba Kurti
EDS HUNGARY
2 REPLIES
Ayman Altounji
Valued Contributor

Re: Power Supply problem

The PCI bus should be able to handle 8 amps without too much trouble but, that may be it, if this is close to the borderline (do you know if it peaks well above 8 amps?).
Ayman Altounji
Valued Contributor

Re: Power Supply problem

We have also our first power supply problem. We bought 6 ML-350 servers the last six months, yesterday one of them went down. It has a power supply problem, the machine doesn't boot up .. it seems to starts and stops eternally. Please we want an official answer from Compaq about the Power Supply issue. We need to change all the power supplies.. we can't just wait for the next one.