Power button cable not plugged in

[MattDavid]

Hello,

I did a stupid thing. While I was cleaning my HDD backplane on my DL160 G6, I pulled the power button + UID cable on the front panel. 

If you've dealt with this server before, you'd know that it's too tight so you can't plug the cable back in. Is there any solution to this problem or any tips how to remove the plastic front panel?

Thanks.

[AmRa · Accepted solution]

Please refer HPE ProLiant DL160 Gen9 Server - Removing and Replacing Power Switch/UID/USB Assembly. Hope this will help to isolate the issue.

https://support.hpe.com/hpesc/public/docDisplay?docId=a00051788en_us&docLocale=en_US