ProLiant Servers (ML,DL,SL)

Power button cable not plugged in

 
SOLVED
Go to solution
MattDavid
Occasional Contributor

Power button cable not plugged in

Hello,

I did a stupid thing. While I was cleaning my HDD backplane on my DL160 G6, I pulled the power button + UID cable on the front panel. 

If you've dealt with this server before, you'd know that it's too tight so you can't plug the cable back in. Is there any solution to this problem or any tips how to remove the plastic front panel?

Thanks.

1 REPLY 1
AmRa
HPE Pro
Solution

Re: Power button cable not plugged in

Please refer HPE ProLiant DL160 Gen9 Server - Removing and Replacing Power Switch/UID/USB Assembly. Hope this will help to isolate the issue.

 

https://support.hpe.com/hpesc/public/docDisplay?docId=a00051788en_us&docLocale=en_US

I am an HPE Employee

Accept or Kudo