Power management and NetWare 6.5

[Stuart_45]

Hi:

I have a ML370G3 with a R1500XR UPS attached running NetWare 6.5 SP1a. If I load the power management agents (tried versions from 1.81A backwards to 1.70) the server begins to shutdown almost immediately. The UPS also powers itself off. I am unable to communicate with the UPS agents using CIM 5.30. Using a Windows server to manage the UPS is not an option. I have the same configuration, but running NetWare 6.0 and have no problems at all.

Has anyone experienced anything similar, if so how was it resolved?

[Klaus Schiffgens]

Hi,
couldn't communicate with UPS agents either on an ML350 G3 'til I used agents Ver. 182 and it works fine with CIM 5.30!

Greetings, Klaus

[Stuart_45]

Hi Klaus:

Where did you find V1.82 of CPM agents? The HP web site has 1.81A as the latest version.

Thanks
Stuart

[JohnWRuffo]

21836 Softpaq for CPM 1.82 (Netware Patch):

description: ftp://ftp.compaq.com/pub/softpaq/sp21501-22000/sp21836.txt

download: ftp://ftp.compaq.com/pub/softpaq/sp21501-22000/sp21836.exe

You must be alredy runing 1.81A

[Stuart_45]

Thank you.

I'll give that a try.