ProLiant Servers (ML,DL,SL)
1748089 Members
4767 Online
108758 Solutions
New Discussion юеВ

Re: ProLiant 1200 No longer Boots

 
Jon Corley
New Member

ProLiant 1200 No longer Boots

ProLiant 1200 suddenly no longer boots. Upon startup, it has 2 long and 2 short beeps, all fans run, and it shuts off, then starts up again with the same result. It never posts anything; just beeps. Thus I replaced the proscessor fan per the Service Guide, and the fan is in good working order, the power supply for this server was replaced last year, and it had full video before this issue began. Any suggestions as to what to replace next on this unit?
2 REPLIES 2
kcpant
Trusted Contributor

Re: ProLiant 1200 No longer Boots

Hi Jon,

Reseat the memory after cleaning the contacts, and other interface cards installed on slots.
PreSales Specialist
Jon Corley
New Member

Re: ProLiant 1200 No longer Boots

Replaced several pairs of memory to no avail. Memory should be good since they were in sealed pkg. Any other ideas? Perhaps processor needs to be replaced?