HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ProLiant 1600 Battery replacement

 
Malcome Greeson
Occasional Contributor

ProLiant 1600 Battery replacement

Does anyone have the proper procedure for replacing the CMOS battery in a ProLiant 1600, PIII/500 server? I've tried this on more than one and CMOS settings are not maintained. The documentation I have for the server does not reflect the actual physical layout of the jumper blocks.

I have successfully performed the replacement on a ProLiant 800, but the jumpers are not the same.

What I've done is to connect the replacement battery on the battery header and then move the adjacent jumper from pins 1-2 to pins 2-3 (theoretically to connect the 'new' battery). After this point CMOS is lost and will not retain settings through a power cycle.

Any help would be appreciated.

MG