ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ProLiant 3000 VGA driver for W2k3

Paul Tromp
Occasional Advisor

ProLiant 3000 VGA driver for W2k3

I have installed Windows 2003 on a ProLiant 3000R/333. I am not able to set the display to 1024. I think I need a specific driver for the "Cirrus Logic 5430/5440", but cannot find it at "Support and Software". Anyone a suggestion.
2 REPLIES
Sunil Jerath
Honored Contributor

Re: ProLiant 3000 VGA driver for W2k3

Hello Paul,
If you have any remote access software installed on your server then remove it first. Cirus Logic drivers are native to OS. Or the other thing you can do is run the Smart Start support pack for W2K3.
Please let me know as to how you make out.

Regards,
Paul Tromp
Occasional Advisor

Re: ProLiant 3000 VGA driver for W2k3

Sunil, thankz for your reply. I followed your suggestion. I deinstalled Remotely Anywhere and I have downloaded the latest Support Pack. I had nearly the latest. It was without a good result. But... at the button "Advanced" at the Display Properties, I clicked the "List All Modi" and choosed 1024x768 and now the display is at 1024x768 with 8 bits. Very strange to manage this at this place..., but it works.

Regards