ProLiant DL360 G7 - Uncorrectable PCI Express Error (Embedded device, Bus 0, Device 3, Function 0, E

[RumBarBar]

Hello everybody!

I have a problem with the ProLiant DL360 G7 server
Deployed Windsor Server 2012 RR2, the server is connected (external) to the pci-e 1050ti 4 GB. All drivers are installed
On the server is running X-ray software (including 3D).
The problem is that the server hopelessly stops working. Black screen, then you need to turn off the button and re-run. This can happen even when the software is not running.  With power supplies all ok
The logs are: EventID 41, error code 0x8000000000000002
In the logs of iLO: Uncorrectable PCI Express Error (Embedded Device, Bus 0, Device 3, Function 0, Error status 0x00004020), ASR Detected by System ROM

[Suman_1978]

Hi,

Firstly, this server does not support Windows Server 2012.
http://h17007.www1.hpe.com/us/en/enterprise/servers/supportmatrix/windows.aspx

Secondly, refer to this article on how to decode or find out which device is causing Uncorrectable error.
https://support.hpe.com/hpsc/doc/public/display?docId=c03525470

---

Thank You!
I am an HPE Employee

Was the post useful? Click on the white KUDOS! Thumb below.  Kudos is a way of saying thank you to a post.
Useful Links for ProLiant Servers

[RumBarBar · Accepted solution]

The problem was solved by replacing the pc-e module, which integrates the motherboard graphics card.
Regarding your reservation that the server does not support the Windows Server 2012 operating system, then at this moment I can not agree with this statement, regardless of the official source. All drivers are installed correctly