Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ProLiant DL370 G6 uncorrectable machine checks

GregChernis
Visitor

ProLiant DL370 G6 uncorrectable machine checks

log view

5 REPLIES
GregChernis
Visitor

Re: ProLiant DL370 G6 uncorrectable machine checks

I have two DL370 G6 machines on hand.  I also have two NC375i quad-port gigabit NICs on hand.  It seems that said servers don't work well with these NICs. 

 

Once either of the NC375i NICs is installed, server gets unhappy.  On the other hand, all is well when I use third-party NICs, such as Intel's 1000PT quad.

 

I am using the ProLiant Support DVD from Oct 2012 over a clean Win2008 R2 SP1 Enterprise installation.

 

PGTRI
Honored Contributor

Re: ProLiant DL370 G6 uncorrectable machine checks

hi,

 

Please take a look here about the UMCE.

 

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02914393

 

Thanks

 

regards,

How to Say Thank You? Just click the KUDOS!
Dave73
Regular Advisor

Re: ProLiant DL370 G6 uncorrectable machine checks

We had all our 375 i and t nics replaced. There was a faulty chip on a certain batch i think. Search the forums. Our issue was pertaining to traffic drops.

 

Regards

GregChernis
Visitor

Re: ProLiant DL370 G6 uncorrectable machine checks

 I've removed both NC375i NICs that shipped to us less than a month ago and placed them on the shelf to pick up dust.  No instabilities with Intel 1000PT quad NICs.

 

I wonder if HP would step up and replace ours with something that works.

Highlighted
GregChernis
Visitor

Re: ProLiant DL370 G6 uncorrectable machine checks

I don't believe that the UMCE fix applies in our case.  We've received both DL370 G6 servers May 5th BIOS, one month apart.  I've been running them with Max Performance: this setting sets VRMs to static mode.