ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

ProLiant DL380 G3 freezes after cpu detection !?

Occasional Contributor

ProLiant DL380 G3 freezes after cpu detection !?


 I have a DL380 G3 Server. It worked very well until today. I think it freezes just befor scsi hard drives detection...

 It freezes after cpu's detection, in here:

 Motherboard leds:

 What i allready tried: jumpers reset bios, battery out, ram out/in, power regulators removed and placed back, scsi hdd removed and placed back...I also tried to power up without hdd but it's doing the same thing.

 On front panel the first led it's having the orange color, the first one from here:

 I mention that this server was used rarely, and it is placed in a room with no more that 10 degrees C, maybe this was a bad factor for what i mentioned above..


 Any thoughts about this issue ?