ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ProLiant DL380 G6 - RHEL4 - HP system homepage statistics not displaying

jcooperNY
Occasional Visitor

ProLiant DL380 G6 - RHEL4 - HP system homepage statistics not displaying

I have a server that came with some of the HP SNMP tools but was not registered with the HP Envision server.

I was able  to get the machine registered and set up with the HP envision server by just running the service and updating the rpms since they were old.

 

I see all the traps going to the trapsink but the HP system homepage is basically blank. I see just the very basic frames and some links. What am I doing wrong?

 

I updated the snmpd.conf file but it seems to do nothing.

 

ProLiant DL380 G6 - RHEL4 - Red Hat Enterprise Linux AS release 4 (Nahant Update 9)

hpacucli-8.30-5.0
hp-snmp-agents-8.5.0.17-19
hpsmh-6.3.1-23
hponcfg-2.2.0-5
hp-wdt-1.1.1-148.rhel4
hp-smh-templates-8.5.0.13-15
hp-ilo-8.5.0-1.rhel4
hp-OpenIPMI-8.5.0-1.rhel4
hp-health-8.6.0.24-24

 

1 REPLY
Abhishek Bangalore
Frequent Advisor

Re: ProLiant DL380 G6 - RHEL4 - HP system homepage statistics not displaying

Hello,

 

I would suggest you to update the PSP on the server and then check for the occurence of the issue as all the agents need to be isntalled.

 

Refer the link provided below in order to install the same:

 

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3884082&prodNameId=3884083&swEnvOID=2025&swLang=8&mode=2&taskId=135&swItem=MTX-4ded10937a2546f0be451cbd41

 

Regards

Abhishek 

Help other's for Better Tomorrow

I am an HP Employee