HPE Community
ProLiant Servers (ML,DL,SL)
1753603 Members
6275 Online
108797 Solutions
New Discussion

ProLiant DL380 G7 Boot issue

 
andyjh
Occasional Contributor

‎06-03-2014 05:34 AM

‎06-03-2014 05:34 AM

ProLiant DL380 G7 Boot issue

Hi, I was applying a firmware update to the server and we lost power. the problem is the server will no longer boot from HDD, CD, USB, or external USB CD drive.

Anyone have any sugestions?

0 Kudos
Reply
1 REPLY 1
Jimmy Vance
HPE Pro

‎06-03-2014 09:31 AM

‎06-03-2014 09:31 AM

Re: ProLiant DL380 G7 Boot issue

Try setting switch 6 to the on position to reset NVRAM. if that doesn't work, if I recall, try setting switches 1, 5, and 6 on to force the system to change over to the backup ROM.  In either case power the server on for a few minutes (till you hear the beep), then power back off and return the switches to the off position.

No support by private messages. Please ask the forum! 
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.