ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ProLiant DL380 G7 Boot issue

andyjh
Occasional Contributor

ProLiant DL380 G7 Boot issue

Hi, I was applying a firmware update to the server and we lost power. the problem is the server will no longer boot from HDD, CD, USB, or external USB CD drive.

Anyone have any sugestions?

1 REPLY
Jimmy Vance
HPE Pro

Re: ProLiant DL380 G7 Boot issue

Try setting switch 6 to the on position to reset NVRAM. if that doesn't work, if I recall, try setting switches 1, 5, and 6 on to force the system to change over to the backup ROM.  In either case power the server on for a few minutes (till you hear the beep), then power back off and return the switches to the off position.




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!