ProLiant DL380 Gen7 and 10/25Gb Eth.Adapter compatibility

[vesix]

Hello,

just need to be sure if HPE Eth 10/25Gb 2p 631FLR-SFP28 Adptr (PN 817709-B21) is compatible with HPE ProLiant DL380 Gen7 server. Have tried to searched everywhere but there is no compatibility tool except the one https://hpeserversoptionscompatibilitytool.itcs.hpe.com but there is only for Gen10 versions.
Not sure if Gen7 is basicaly able to work with more than 10GbE adapters. Please advice

Thnaks in advance

[Anu_K]

Hello vesix,

I don't see this adapter under supported parts list for DL380 Gen7 server.

You may refer to the option parts list of this server for supported adapters : https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c02755440#N10891

Hope it helps!

Note: "While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company."

[ManBha]

Hello,

The adapter is not supported on this server.

Please do refer the quickspecs and option parts for the supported adapters.

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04199811#

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c02755440

Thanks.

If you feel this was helpful please click the KUDOS! thumb below and accept the solution.

[vesix]

Hello,

thanks a lot to both for your answers indeed.

Otherwise should I take this as official compatibility response? Or in general the HPE support web site servers xxxx - Option Parts (HP ProLiant DL380 G7 Server - Option Parts for instance) should I take as HPE official compatibility web sites?

Thanks in advance