ProLiant Servers (ML,DL,SL)

ProLiant DL380 Gen9 - Disable NICs Shared Memory

 
idiot_wind
Occasional Contributor

ProLiant DL380 Gen9 - Disable NICs Shared Memory

Greetings,

I need to diable the shared memory on a NIC adapter on 600+ ProLiant DL380 Gen9.

The directions are as follows:

  1. In POST, press F9.
  2. Select System Configuration.
  3. Click the adapter.

My question is, is there another way to make these modifications, like logging into the iLO or some other means?  It will take me a lot of time to execute the above steps on all of my servers.

My servers are currently running RHEL 7.4 and I will be upgrading to RHEL 7.6.

Any direction or suggestions would be greatly appreciated.

Best regards,

frank

1 REPLY 1
SanjeevGoyal
HPE Pro

Re: ProLiant DL380 Gen9 - Disable NICs Shared Memory

Hello,

I hope below customer advisory will help you.

Advisory: HP ProLiant Gen9 Servers - Red Hat Linux Enterprise Server 6 - Network Adapters May Become Unresponsive When Enabling NPAR or iSCSI

https://support.hpe.com/hpesc/public/docDisplay?docId=c04950880&docLocale=en_US

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,


I am a HPE Employee

Accept or Kudo