ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ProLiant DL380 Gen9 iLO status

faziz123
Advisor

ProLiant DL380 Gen9 iLO status

Hi

How i can monitor ProLiant DL380 Gen9 iLO interface, what is the OID that i can use?

also where i can find all MIB/OID for this servers like fan, temp, memory..etc

Thanks

5 REPLIES
FabioC1
HPE Pro

Re: ProLiant DL380 Gen9 iLO status

Hi  faziz123 !

To access ILO you need only to configure IP to this port.

User Name and Password it is in lablel where you find the serial number.

By ilo when you click in system information in left table do you see all information, BIOS, FAN, Storage, power etc.

Without MIBS is default of ILO 4 

 

More informtions about ilo you find in User Guide

https://support.hpe.com/hpsc/doc/public/display?docId=c03334051

 

 

FabioC1 - HPE Pro

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
faziz123
Advisor

Re: ProLiant DL380 Gen9 iLO status

Dear Fabico

The iLO already configure, what am i talking about is, what is the OID that i can used to retrive iLO status, like interface up/down when use snmpwalk, i need the OID for iLO interface, fan, power supply, memory..etc so i can get these information remotely thorugh SNMP

 

Thanks

 
FabioC1
HPE Pro

Re: ProLiant DL380 Gen9 iLO status

For monitor and support you can use the HPE SIM

https://www.hpe.com/br/pt/product-catalog/detail/pip.489496.html

The MIBs are Here

https://support.hpe.com/hpsc/doc/public/display?docLocale=en_US&docId=c04272529

 

 

FabioC1 - HPE Pro

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
faziz123
Advisor

Re: ProLiant DL380 Gen9 iLO status

Hi

I did not find any OID No. for HP Server like iLO status, memory..etc, i do not know if HP have website search for OID like cisco or not

Thanks

FabioC1
HPE Pro

Re: ProLiant DL380 Gen9 iLO status

HP ProLiant Servers - Finding Object Identifier (OID) of Components on ProLiant Servers

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c01430245

FabioC1 - HPE Pro

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.