ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ProLiant DL380p G8 - Powering (and fitting) a Quadro K6000 card

 
marc_131
Occasional Contributor

ProLiant DL380p G8 - Powering (and fitting) a Quadro K6000 card

Trying to find the parts needed to power and fit for an NVidia Quadro K6000 grphx card into our server - ProLiant DL380p G8. Have the standard pci riser board, but the card will not fit into the pci x16 slot due to it being double height and the x16 is top slot and clearance issues. We are also trying to find the cables needed to power the card, it has 2 6-pin connections it needs. We've got 2 750w psu's, but I'm not sure how to tap into them.

Any help is greatly appreciated.

Thank you.

2 REPLIES
Jimmy Vance
HPE Pro

Re: ProLiant DL380p G8 - Powering (and fitting) a Quadro K6000 card

If you refer to the Quixkspecs you can see the options that were available for additional graphics http://www8.hp.com/h20195/v2/GetPDF.aspx/c04128241.pdf  refer to page 50 HP Computation and Graphics Accelerators 

 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
Vktor
Frequent Advisor

Re: ProLiant DL380p G8 - Powering (and fitting) a Quadro K6000 card

On this server will never put it Quadro K6000 card. check the compatibility list as recommended by Jimmy. Another thing through pci-e slot graphics cards cannot use more than 75 watt