ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ProLiant DL380p Gen8 - reset after remote console

 
tboeing
Occasional Visitor

ProLiant DL380p Gen8 - reset after remote console

Hi, im new in my company and also new to iLO4.

We are using the ProLiant DL380p Gen8 server with firmware 2.10 Jan 15 2015.

Last friday i connected to the webpage of this server, started the remote console under "Remote Console" -> "Launch" and closed it again. Shortly after some servers could not find there storage.

In the iLO Event Log i can see a "Server reset" after my action, but im not sure why it happend.

I attached the mentioned part of the event log.

Is there anybody who can explain to me what happend exactly. I dont think that if you start the remote console the whole server resets usually.

Thanks and Regards

TBoeing

 

 

1 REPLY
krasinka1409
Respected Contributor

Re: ProLiant DL380p Gen8 - reset after remote console

Hello, 

similar behavior can be seen if server and iLO are configured with one and the same IP address. 

Best Regards