ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ProLiant DL385 G7 ILO array not recognized

rucknrun
Occasional Contributor

ProLiant DL385 G7 ILO array not recognized

We have 2 ProLiant DL385 G7 servers that are set up with ILO 3.  One I can see the status of the internal disks in the arry one I can't.  I can't figure out how to get ILO to recognize the internal array.

 

I like logging into ILO and  making sure everything is green.  Not having the disks in the system information on the one server kinda sucks.

 

Any suggestions are much appreciated.

2 REPLIES
Oscar A. Perez
Honored Contributor

Re: ProLiant DL385 G7 ILO array not recognized

You mean the hard drives on your second backplane aren't displayed in iLO3 web GUI under system information->Drives?

 

We are fixing this issue in the next iLO3 firmware release. This new release is going to hit the web pretty soon.




__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!
Oscar A. Perez
Honored Contributor

Re: ProLiant DL385 G7 ILO array not recognized

iLO3 version 1.28 has been released to the FTP.  This version should fix this issue.

 

Online ROM Flash Component for Windows x86
ftp://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-ilo/p901462262/v73831

Online ROM Flash Component for Windows x64
ftp://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-ilo/p1728391553/v73830

Online ROM Flash Component for Linux
ftp://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-ilo/p1255562964/v73832




__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!