[ProLiant Gen10] Base System Device driver not found - code 28

[rook117]

Hi,

I'm currently having a driver problem on my DL360 Gen10, based on Windows Server 2016 (Datacenter Edition).
Base system device driver isn't installed & found with Windows Update. 

ID Hardware of this is : 

• PCI\VEN_103C&DEV_3306&SUBSYS_00E41590&REV_07
• PCI\VEN_103C&DEV_3306&SUBSYS_00E41590
• PCI\VEN_103C&DEV_3306&CC_0088000
• PCI\VEN_103C&DEV_3306&CC_0880

Someone already had this problem ?

Thanks for help,

Best regards,

[bman_36]

I have not had that issue, but this is the device 'Integrated Lights-Out Standard Slave Instrumentation & System Support' according to the vendor and device id's.  

Have you installed the latest PSP.  

I have 2 iLo devices listed under system management in device manager.  iLO 5 (ASR) and iLO (CHIF). 

Brandon

[Cali]

Install the Service Pack for ProLiant, it contain all HPE Server Drivers and Firmware:

http://www.hpe.com/servers/spp/download

[Thomas Boomer]

I am having the same problem. DL380 G9, Windows server 2019. There is an ILO controller driver update, but it does not match the plug and play ID for the controller which is PCI\VEN_103C&DEV_3306. Instead it contains PCI\VEN_103C&DEV_3307.  I have not seen a driver for the former for Windows Server 2019. I did find an older driver that works with Server 2012R2 but won't install under 2019.  

[locoroco86]

good afternoon
how did you manage to solve this problem?

[Cali]

The Service Pack ProLiant (Link above) contains all Drivers in one Package.
In Windows Mount the ISO and start the Setup

Or did you install it and still have the Message?
If, yes, what Server and OS do you have?

[RumenMR]

Hello, 

my server is ProLiant DL360 Gen10 with iLO 5. I update SPP from link (all - recomended and requiered) and install last version of iLO5 firmware 2.33, but still in device manager I have Other device -> Base System Device.
PCI\VEN_103C&DEV_3306&SUBSYS_00E41590&REV_07
PCI\VEN_103C&DEV_3306&SUBSYS_00E41590
PCI\VEN_103C&DEV_3306&CC_088000
PCI\VEN_103C&DEV_3306&CC_0880
From site Device Hunt I found that is related with Integrated Lights-Out Standard Slave Instrumentation & System Support, but only this. 
How I can remove this/find drivers
Thanks in advance!

[RumenMR]

Hello again

I found solution. I install HPE Scripting Toolkit for Windows (last version 11.40)
https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_6944d3af433f4f799f3eb2490c

and now all is OK.

Have a nice day!!!

[sdhweb]

Hi,

And how did you go about to install this? I didn't find a simple exe-file to run.

[Cali]

Download the Service Pack ProLiant

http://www.hpe.com/servers/spp/download

Mount the ISO on your Windows PC or Server.

Start the hpsum.bat in the root and follow the Install Wizzard for local or Remote Installation.

This SPP contains all Driver and Firmware for your Server in one place.