ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ProLiant ML 350 G3 Storage software

erics3000
Occasional Advisor

ProLiant ML 350 G3 Storage software

I have a old server with 2000 server sp3 on. The system bios is d14 01/08/2003. It has a Compaq 64 bit 66mhz dual channel wide ultra 3 controller card for there mirrored o/s drives, and a smart array 5300 controller card for there data drive.

I had a bad controller card but whne replaced my data drive came back up. I was going to install service pack 4 and some storage controller software, this way I can get some logs and keep a eye on things remotely . Not sure which software would be best, and would love some input. I am going to check to see if there is a newer bios too.

Thanks
1 REPLY

Re: ProLiant ML 350 G3 Storage software

Hello, erics3000!

As for the firmware, the safest bet is to apply the latest Firmware Maintenance CD available for your server. For monitoring software, install the Proliant Support Pack and make sure that the System Management Homepage is well configured.

Regards,
Carlos.

PD: Firmware CD link:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=316537&prodNameId=3279705&swEnvOID=181&swLang=8&mode=2&taskId=135&swItem=MTX-2daedac9c17648c7905b64f8c3

Proliant Support Pack:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=316537&prodNameId=3279705&swEnvOID=181&swLang=8&mode=2&taskId=135&swItem=MTX-91b00ba75cd14fe08c6aa669c0
Choose the .exe only
"ITS NOT ABOUT HOW HARD YOU CAN PUNCH, ITS ABOUT HOW HARD YOU CAN TAKE A PUNCH AND KEEP MOVIN' FORWARD!!!"