HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ProLiant ML 350 G5: Power cap cannot be reached with current server configuration

 
blentes
Frequent Advisor

ProLiant ML 350 G5: Power cap cannot be reached with current server configuration

Hi,

 

i found in a Proliant ML 350 G5 in the IML the following error: Power cap cannot be reached with current server configuration. Does anyone knows something about it ? The server is a tower, 2 PSU, 32GB RAM, two Xeon each with 4 cores, SA E200i with 8 sas disks 140 GB in a RAID 5 with a HotSpare.

 

Thanks for any help.

 

 

Bernd

1 REPLY
Suman_1978
HPE Pro

Re: ProLiant ML 350 G5: Power cap cannot be reached with current server configuration

Hi,

 

The issue or error could be with iLO firmware.

Update the iLO Firmware and see if that fixes the issue.

Check out these two articles.

 

http://h20564.www2.hp.com/portal/site/hpsc/public/kb/docDisplay/?docId=emr_na-c01962200
http://h20564.www2.hp.com/portal/site/hpsc/public/kb/docDisplay/?docId=emr_na-c01130986

 

 

 

Thank You!
I am a HP employee
__________________________________________
Was the post useful? Click on the white KUDOS! Thumb below to say Thank You!

Useful Links for ProLiant Servers

Self Solve Options for ProLiant Servers