ProLiant ML110 / Adaptec 2610SA / SCO 5.0.7

[B. Lampe]

Hi,
i have a problem with a ProLiant Ml110 and an Adaptec 2610SA Controller. The OS was SCO 5.0.7 (fresh installation). After booting the CD I loadet the driver aaraid with "defbootstr link=aacraid". After the driver was installed from the floppy the new Hardware List appears - but there was allways the error message: no boot controller. Have I make a mistake? The Controller ist a array with 236 Volume.
Sorry - my english is very bad, but I hope, you unterstand my problem.

[Van Cotoco]

Hi,

Try this:

defbootstr link=aacraid hd=Sdsk Sdsk=aacraid(0,0,0,0)


I'm assuming that you are sure that aacraid is the name of the driver for the Adaptec 2610SA Controller, as you mentioned.

Regards,

Van