ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ProLiant ML110G3 BIOS problem

SOLVED
Go to solution
Stoya3
Occasional Visitor

ProLiant ML110G3 BIOS problem

When I boot this new server BIOS check, and recognize all stuf (memory,SCSI HDD, CD, DVD), and then stop...
"Checking NVRAM"
what next?
2 REPLIES
Rajashekar Chintakunta
Honored Contributor
Solution

Re: ProLiant ML110G3 BIOS problem

Hi Stoya,

Open the system box press the CMOS reset button and restart the server and check if it boots fine.

The system board has a system configuration (CMOS) button (SW50). To clear system configuration, disconnect AC power and press the CMOS button.

HP ProLiant ML110 Generation 3 Server Maintenance and Service Guide:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00448584/c00448584.pdf

Regards,
Raj.
Stoya3
Occasional Visitor

Re: ProLiant ML110G3 BIOS problem

there was a problem with MB, as a HP technician said, and now I wait for a new MB.
Thank`s anyway