ProLiant ML150 G3 very slow RAID1

[Voldemar]

I have a ProLiant ML150 G3 with 3 72GB SAS drives connected to the raid card.
System Windows Server 2003 SP2.

1 disk system.
2 and 3 disks RAID.

With RAID1 system very slow!
With RAID0 all OK!

What to do?

[Mauro Rusignuolo]

when do you have installed and configurad raid 1?

pheraps it's building process running yet?

bye.

TJK.

[Voldemar]

As it to define?
And then, RAID0 works normally.

[Mauro Rusignuolo]

excuse me for my english.
I havent't understood yyour question.

if, for istance, you have created the raid 1, one hour ago, pheeraps it's still building the raid.

during POST you should be able to se the controller message, about the building/verify process of the raid 1.

performance will be degraded since the end of the building /verify process.

bye.

TJK.

[Voldemar]

I don't recieve any message during POST!
Status RAID "Optimal".

[Mauro Rusignuolo]

so, excuse me again.
you have create, and at the moment you have configured, both raid.
first one, using only one HD, in raid 0.

second and third HDD in raid 1.

you are trying to boot from the second raid, and you have installed the OS and the system it's slow?

let me know.

escuse me again, but for me it's not so clear...

bye.

TJK.

[Voldemar]

No.

I'm create only one RAID1.

System install on one HD (no RAID0 or RAID1).
System (OS) work fine!

But RAID1 is very slow!

[Mauro Rusignuolo]

it's very strange.
if your raid it's not in rebuilding/verify process ... it seems there should be no reasons...

the leds of the two hdd are ?


bye.

TJK

[Voldemar]

Yes.

[KarloChacon]

take a look at the Array Configuration Utility more info to see any info and create a report to see any error using array diagnostic utility

regards