ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ProLiant ML150 G6 not booting. Fan at full speed

Mastika
Occasional Visitor

ProLiant ML150 G6 not booting. Fan at full speed

When I start the server, the fan is at full speed forever and I can´t see anything on the screen. The keyboard and the mouse are not working also.

I had this problem before and I fixed it using a USB keyboard instead of a PS/2. After two months ,I've swith off the server and it is not starting again.

I've been reading the documentation and the forum but I haven't found the same problem.


Thanks
1 REPLY
Johan Guldmyr
Honored Contributor

Re: ProLiant ML150 G6 not booting. Fan at full speed

Hi,

look for error leds on the front, back and on the system board.
tried minimal/bare-bone config (take out as many components as possible to try to find what is causing the issue)?