ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ProLiant ML30 Gen9 Recovery Media

 
SolarSolve
Occasional Contributor

ProLiant ML30 Gen9 Recovery Media

We have a HPE ProLiant ML30 Gen9 server and it came without any Recovery Media.

I am looking to find the correct Recovery Media and the instructions to do a Bare Metal Restore (or similar) so we have everything to hand in a worst case scenario.

I have found this https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_1b1f0099836545eb9a443bba88&swEnvOid=4168 but nothing to give a definite answer as to whether it is the correct media.

Can someone please advise on this and best practices for recovery procedure?

Regards

2 REPLIES 2
aviorp
Advisor

Re: ProLiant ML30 Gen9 Recovery Media

Hello,

Please use the link below to download the latest version of the Intelligent Provisioning Recovery Media. (verson 2.71)

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_f6abd3e3803e4b2395eee361c3

 

 

SolarSolve
Occasional Contributor

Re: ProLiant ML30 Gen9 Recovery Media

Thank you for the reply.

 

Can you instruct us on how we would go about performing a bare metal restore using the link you have provided?

 

Our current system has an internal drive (seperate to the RAID array) which we have a daily backup stored on. The process is automated by Windows Server Backup. In the event of a catastrophic failure, where the system will not load, what is the procedure to get us back up and running? Assuming Windows will not start and we are stuck in BOOT.