ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ProLiant ML310 G5 Embedded SATA RAID Issue after System Maintenance Switch

 
Highlighted
Collector

ProLiant ML310 G5 Embedded SATA RAID Issue after System Maintenance Switch

Hi all,

 

I was on the phone with HP Support (started with Active Support Chat) due to a hardware related issue.

For diagnostic purposals the HP Support asked me to set the System Maintenance Switch to ON and to clear the nvram

.

After that I've lost my embedded SATA RAID configuration, because it disabled the Embedded SATA RAID.

That means at Startup i can see now 4 single drives, instead of 2x RAID1 as it was before.

 

Windows is still starting, it takes the first available disk, but no RAID1 is available anymore, instead of RAID1 i see now in Windows Explorer all 4 single drives.

 

I wanted to enable the embedded SATA RAID via BIOS, but then an alert message appears saying that enabling of the RAID will result in data loss.

 

I've also tried already to download and install the HP Storage Maneger, but it says: "No Controller found"!

 

What can i do to re-enable my ebedded SATA RAID without loosing the data on the disks?

 

 

Thanks for any hints.

 

best regards,

 

Tho