ProLiant ML310e Gen8 v2 CPU Temperature Stuck at 40*C in iLo and SNMP

[djex81]

I have four ProLiant ML310e Gen8 v2 servers. On each of the servers the reported CPU temperature from iLo and SNMP is always 40*C and never changes. I've tried clearing the NVRAM and restting iLo which didn't help. I'm wondering if anyone else has run into this issue? For now I've found a work around by using a third part program to get the CPU core temperatures. I've already contacted HP support but so far no luck in finding an anwser. I'm more curious if anyone else has had this issue before.

[wanhao]

I think you can try to upgrade BIOS and ILO to the latest version, maybe it can fix your problem, good luck!

[_r00t_]

I have the same problem with a DL380p g8, updated BIOS and iLO to latest versions and nothing happened.