ProLiant Servers (ML,DL,SL)
1748222 Members
4626 Online
108759 Solutions
New Discussion

Re: ProLiant ML330 G3

 
derail
New Member

Re: ProLiant ML330 G3

Also having same problem with my ASC-29160i card and ML330 G3...

I Get the F8 Multi Initiator Message and gives the same options (1, 2, exit) as HighDesert mentioned. And F8 does nothing when it is pressed during the time that the prompt to press F9, F10, or F11 is shown. Tried inspect feature in BIOS, but feature is missing. Attempted RAID setup with SmartStart, and the ACU reports unsupported controllers. Am I out of luck here? I've looked through every piece of documentation I could find, but no solution was there.

Thanks

cnb
Honored Contributor

Re: ProLiant ML330 G3



derail-

ACU is only for Smart Array controllers. You'll need to use the RBSU as mentioned in this thread, follow the links above or start a new thread.

HTH,