HPE Community
ProLiant Servers (ML,DL,SL)
1752679 Members
5273 Online
108789 Solutions
New Discussion

Re: ProLiant ML350 G3 1GB RAM - Boot hangs with RAM hardware error (SuSE Linux SLES8)

 
Stig Rasmussen
Occasional Contributor

‎03-18-2004 01:40 AM

‎03-18-2004 01:40 AM

ProLiant ML350 G3 1GB RAM - Boot hangs with RAM hardware error (SuSE Linux SLES8)

I have a ProLiant ML350 with 1GB RAM (512MB on board and 512MB as a PC2100 DDR SDRAM chip)

But when I boot the machine after a appearently successful SuSE Linux (SLES8) install the boot log hangs with a message saying: "Hardware error on RAM chip"

Can anybody tell me if this is due to a real failure on my RAM card? or should I rather try updating my drivers?

Suggestions are very welcome.

Thanks
Stig
0 Kudos
Reply
1 REPLY 1
Olivier Drouin
Trusted Contributor

‎03-18-2004 07:22 AM

‎03-18-2004 07:22 AM

Re: ProLiant ML350 G3 1GB RAM - Boot hangs with RAM hardware error (SuSE Linux SLES8)

I would check if the RAM is properly seated. If not I'd say it is a real failure.

You can update the ROM too, but I wouldnt bet on this one.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.