ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ProLiant ML350 - no video - no keyboard - no mouse

 
Axxis
Occasional Visitor

ProLiant ML350 - no video - no keyboard - no mouse

I have a ProLiant ML350 that appears to power up fine, no beeps, all LEDs indicate healthy state. However, there is no video output and no apparent communication via keyboard or mouse. All front panel LEDs are lit solid green, the NIC LED is flashing. I cannot get in via RDP, cannot ping. Please help.
5 REPLIES
Johan Guldmyr
Honored Contributor

Re: ProLiant ML350 - no video - no keyboard - no mouse

Hey, do you have iLO on this machine? Try connecting there.
Johan Guldmyr
Honored Contributor

Re: ProLiant ML350 - no video - no keyboard - no mouse

Oh, and if that don't work - might be an idea to boot it up with the chassi off, so you can see if there are any error leds on the system board.
Trygve Henriksen
Respected Contributor

Re: ProLiant ML350 - no video - no keyboard - no mouse

Which Generation?

If this is an older server, with an ILO card, the cables may need to be connected to that, instead of the built-in connectors.
And the very earliest ILO-cards needed a separate PSU, too.
Axxis
Occasional Visitor

Re: ProLiant ML350 - no video - no keyboard - no mouse

Thank you all for the helpful suggestions. This machine does have ILO but it hadn't been configured. Basically, it looks like the video and maybe also the PS/2 were fried. I replaced the system board this morning and everything came right up. Thanks again.
Axxis
Occasional Visitor

Re: ProLiant ML350 - no video - no keyboard - no mouse

Oops. See previous comment for resolution.