ProLiant Ml110 G2, W2K server, network driver

[Raigo]

ProLiant ML110 G2, Windows 2000 Server.
I tried to install the driver from HP drivers site
http://h18023.www1.hp.com/support/files/server/us/download/22931.html

unfortunately, this driver does not install.
Either running the exe nor from system->device manager->update driver


What driver to use with W2K server?
Is there any tricks to know about when installing this driver?

Do I have to enable/change something in BIOS to be able to use network?

for now everything is default - new machine out of box. Only I enabled Floppy to install SATA RAID controller driver with F6.

[Connery]

Raigo,
That is the correct driver.

Can you provide the details about the installation failure?

What error message are you receiving?

[Raigo]

When I try to install network driver, what is available in HP drivers web, I get error:
The software will not be installed on this system because the required hardware is not present in the system or the software/firmware doesn't apply to this system.


Is it possible that network card is disabled in BIOS by default? where?

[Connery]

Raigo,
The ML110 uses an onboard NIC that is not supported with HP's standard NC series NIC drivers.

The ML110 uses an Intel 82541PI chipset.

Here is a link to the W2k3 driver.
http://h18023.www1.hp.com/support/files/server/us/download/22856.html

If that doesn't work for you, you can try the driver from Intel:
http://downloadfinder.intel.com/scripts-df-external/filter_results.aspx?strTypes=all&ProductID=1938&OSFullName=Windows*+Server+2003+Standard+Edition〈=eng&strOSs=94&submit=Go%21

Best regards,
-sean