HPE Community
ProLiant Servers (ML,DL,SL)
1751936 Members
4810 Online
108783 Solutions
New Discussion

Re: Problem! Server ML350e gen8 08-HD Max sensor failed!

 
hudoy
Occasional Visitor

‎08-06-2013 06:56 AM

‎08-06-2013 06:56 AM

Problem! Server ML350e gen8 08-HD Max sensor failed!

New server. Installed on the server windows SBS2011 essentials. 2 HDD in raid 1. There is not any PCI or PCIE cards. FAN speed 100%. TURBO Noise.
Is responsible for what this sensor? where it is physically located?

0 Kudos
Reply
1 REPLY 1
Sbrown
Valued Contributor

‎08-07-2013 08:30 PM

‎08-07-2013 08:30 PM

Re: Problem! Server ML350e gen8 08-HD Max sensor failed!

the new P420 firmware will clock down the raid controller cpu with 8 drives or less to solve the heat issue. Performance will drop down of course.

Make sure all drive blanks are filled.

P420 runs too hot due to insufficient airflow and poor heatsink/thermal paste.

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.