HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem! Server ML350e gen8 08-HD Max sensor failed!

 
hudoy
Occasional Visitor

Problem! Server ML350e gen8 08-HD Max sensor failed!

New server. Installed on the server windows SBS2011 essentials. 2 HDD in raid 1. There is not any PCI or PCIE cards. FAN speed 100%. TURBO Noise.
Is responsible for what this sensor? where it is physically located?

1 REPLY
Sbrown
Valued Contributor

Re: Problem! Server ML350e gen8 08-HD Max sensor failed!

the new P420 firmware will clock down the raid controller cpu with 8 drives or less to solve the heat issue. Performance will drop down of course.

Make sure all drive blanks are filled.

P420 runs too hot due to insufficient airflow and poor heatsink/thermal paste.