ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem adding p800 to existing DL385 G2

 
bhedrick
Occasional Visitor

Problem adding p800 to existing DL385 G2

Trying to add local storage - p800 controller (connected to MSA50) to existing server.

Server is DL385 G2 with onboard NC373i and p400. Server has iSCSI connection through NC373T.
16GB RAM - 32bit W2k3 Enterprise
Server is running Oracle 9i Enterprise

After adding the p800, I immediately start having what appear to be networking issues. Clients are losing connections to the DB and transactions are timing out. The server processes a steady load of small transactions (~1000/minute) and these begin to have issues as soon as the card is added. Remove the card, and everything is fine.

Have run Smart Update Mgr and all drivers/firmware are up-to-date. Feels like some sort of resource issue, but nothing shows up in event or device viewer.

Any ideas/recommendations would be greatly appreciated.

Thanks,

Brian
2 REPLIES
marcus1234
Honored Contributor

Re: Problem adding p800 to existing DL385 G2

update firmwares with firmware cd
8.6

and then also the controller there is new firmware for the controller just out has many fixes

then use so

if issue persists
run diagnostics full and post here

and also post iml log contents hee but
only after doing updates //



This is how we thank in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33


enjoy

any issues just post details
goodluck :)
marcus1234
Honored Contributor

Re: Problem adding p800 to existing DL385 G2