Problem after installing RIB

[Ayman Altounji]

My system is configured with SmartStart 5.20, and works fine, but after install a Insight Manager Card they show two video drivers ATI Rage IIC, and one of them show an error: cannot start driver.
I know RIB has its own video adapter but i don't understand why the two video adapters collide.

TIA
Jose Enrique Llopis
Caja Ahorros Mediterraneo - Alicante - Spain

[Mark Cloutier]

Windows 2000 is picking up both video cards. Ths is normal. Disable the one that is showing the error in Device Manager.

[Ayman Altounji]

Hi Mark..
I am having the exact problem. I have disabled the one that gives the error, and also had to cut back the 3D acceleration through the Display properties. Can you by any chance tell me why exactly this is necessary or is it a misconfiguration on my part? My setup is the same as above... Thanks
Eric

[Mark Cloutier]

This is happening due to the on-board video having the same memory range as the RIB video and hence the conflict.