ProLiant Servers (ML,DL,SL)

Problem dl120 g6

Occasional Visitor

Problem dl120 g6

Hello everyone.

I have a proliant dl120 g6.
After a long load of the processor the power went off.
I changed the power but since I have a beep code at startup. 4-3-3-1.
I tried to reverse the RAM of all test one to one but still the same thing ...

I can not find a solution to my problem

Can someone help me?

Thank you

Occasional Visitor

Re: Problem dl120 g6

after several tries I managed to get an error on RAM

Generic 01/01/1970 00:00:37 Memory ECC Uncorrectable ECC

After cutting the DL120 and having it turned on again I end up with the same problem as before

In the BMC I do not see the temperature of the RAMs knowing that I tested them and it works

Do you have an idea ? A problem of powering the RAM by the motherboard?


Re: Problem dl120 g6

Hi Cmathias,

This seems to be an issue with the processor. If you have installed a new processor, please check for the compatibility  of the processor for this server. Basically the system is not allowing the process to proceed due to incompatibility reasons. 




I am a HPE Employee

Accept or Kudo