Problem in ML350 G4p and SATA

[Eduardo Rodríguez-Mena]

(My english is far from good)

I have a ML350 G4p with a SmartArray 641 SCSI RAID controller and I need to conect a 250 Gbytes SATA disk to the Onboard SATA Controller, but the disk is not detected in BIOS nor in OS.

Does anybody now if there is any limitant with these configuration

Thanks

P.S. This thread has been moevd from Disk to ProLiant Servers (ML,DL,SL). - Hp forum Moderator

[Suman_1978]

Hi,

Either one of the controllers work at a time.

If SCSI controller is used then onboard SATA will be disabled.

Thank You!
I am a HP employee.