ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem of controler 6i with hp proliant DL380 G4

SOLVED
Go to solution
sassou
Frequent Advisor

Problem of controler 6i with hp proliant DL380 G4

Hi,
Trying to install a new DL 380 G with smart start, I get this error :
1776-SLOT 0 scsi bus terminator error.
And I could not install the the the Controler HP Smart Array 6i with is detected by the system.
So my system could not dectect any disk for installation
Thank you for your help
4 REPLIES
ramesh_naik_
Esteemed Contributor
Solution

Re: Problem of controler 6i with hp proliant DL380 G4

Hi Kuzo,


The SCSI bus is not properly terminated when internal and external drives are attached concurrently to the same SCSI bus.
The indicated SCSI bus is disabled until this problem is resolved.
Turn off the server power and check the cabling to the specified SCSI port.

Regards,
rmn
Caster Troy
Regular Advisor

Re: Problem of controler 6i with hp proliant DL380 G4

check for cabling of SCSI ports.
Evil Has Its Winning Ways
RGP
Frequent Advisor

Re: Problem of controler 6i with hp proliant DL380 G4

Hi,
Are you using the BLUE "point to point" cable or the grey flat cable with a terminator?

You should be using the BLUE BLUE "point to point"
Rgds,
Roy
sassou
Frequent Advisor

Re: Problem of controler 6i with hp proliant DL380 G4

Hi,
I just verify the terminator.
My problem is du in the fact that the scsi bus is not terminated.
I have one terminator but after that another scsi bus start
Thank you for your help
KUZO