Problem to install third and fourth NIC

[MahdiBashiri]

Hi
we have many HP DL380 G6 with 4 integrated NIC, and i installed windows 2003 Ent. and see only two NIC card installed and remain NIC's show in device manager only "Ethernet controller"
i need to use all card in team netwroking to have increase traffic and load balancing with LACP protocol
i have beed download drive and install it but third and forth NIC not installed,
please let me know how can do this?

Regards,
Mahdi Bashiri

[Yaning.Wu]

HI,Mahdi Bashiri

Please try to update the BIOS,NIC firmware and reinstall the driver.If it doesn't work,try to clear the NVRAM or replacement the system board

[Johan Guldmyr]

Is the OS updated/patched?

Do you not see the NICs at all in Windows?

Do you see them in BIOS?

Do you get link on the ports?

[MahdiBashiri]

Hi

Is the OS updated/patched?

Yes, all patch and update installed.

Do you not see the NICs at all in Windows?

I see all NIC,s in "device manager" but two of them show "Ethernet Controller" and can not install driver HP NC 382i

Do you see them in BIOS?

I see in BIOS but two of them are "Disable Mac address"


Do you get link on the ports?

I do not get any link to these ports only get link to first and second port

[Johan Guldmyr]

>> I see in BIOS but two of them are "Disable Mac address"

I suspect this might be telling, but what's causing it I do not know..

In BIOS do you see any NIC settings? Something that might be related to this? Or maybe something during POST?

Have you tried a reset of the BIOS settings?