ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem with ARRAY Rebuild ML 110 G5 and SAMSUNG SATA II HDDS

CyberDudeIQ
Occasional Visitor

Problem with ARRAY Rebuild ML 110 G5 and SAMSUNG SATA II HDDS

Hi All,
I created RAID 1 with 2 Samsung SATA II HDDs...at first it went fine for 3 weeks. Then Drive 0 failed (master)...when I replaced the drive and tried F8 to rebuild the array..it give me error message to check array type and status. Called HP Support and was told they don't support drives other than HPs.

Does anyone have experience on how I solve the problem?

Thanks,
Cyber
1 REPLY
KarloChacon
Honored Contributor

Re: Problem with ARRAY Rebuild ML 110 G5 and SAMSUNG SATA II HDDS

hi

check this PDF
there are 2 ways to rebuild a HDD with the embedded SATA RAID


Rebuilding an array , page 7
http://www.jraf.ru/books/embedded_sata_raid_manual.pdf

or you can use the HP storage manager as an application to rebuild the HDD on windows hoping it is windows you OS

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3577708&prodNameId=3577715&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-3f27718395524ff393ffc94d2d

use search to find out how to rebuil
Didn't your momma teach you to say thanks!