ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem with CL380

Zrida Chokri
Occasional Contributor

Problem with CL380

Hello;

I have serious problem with CL380

I can't boot the 2 nodes together.

I boot the first node when i boot the second one i lost the connection with shared subsystem storage equiped with one controller CR3500.

Thanks.
1 REPLY
Stephen Kebbell
Honored Contributor

Re: Problem with CL380

Hi,

Check the SCSI IDs of the controllers in each node. Go into System configuration utility to check it (press F10 when prompted).
Node A: Channel 1 - ID 7, Channel 2 - ID 6
Node B: Channel 1 - ID 6, Channel 2 - ID 7

If 2 adapters on the same channel have the same SCSI ID, then it will crash.

Regards,
Stephen